VID-1 Voice Module

The VID-1 is a digital voice recorder and will operate with the RC-1000, RC-100 repeater controller or any repeater. Using repeater receiver or external microphone audio any voice message can be stored for later playback. Any type of voice, male or female, and audio sound effects can be recorded. Messages such as "at 7 tonight swap net all are welcome" or "to access ten meter remote base enter DTMF code star 4 2" or any message up to 20 seconds can be stored.

When used with RC-1000 or RC-100 the message can be remotely fecorded. Simply select the record mode with DTMF and change ID without having to go to the repeater site. Very useful for special event anouncments.

Features

Voice ID using actual recorded voice of repeater owner.
Selectable 5, 10, 15 or 20 seconds play time.
Operates on 8 to 15 VDC @ 100 mA with automatic power down mode.
Uses Information Storage Devices ISD-1420A IC
Recorded message stored in EEPROM retained for 10 years without need for battery backup.
The message can be changed at any time.
The VID-1 is contained on single PC board of 3.2" x 1.6" with interface.
Connector with audio input & output, PTT, record/playback & ID start.
Complete manual with schematics, interface & operating instructions.